 |
 |
 |
| |
Packaging
Specifications of Zinc Alloy
* 104 alloy
ingots per article
*
(an alloy ingot weighs
about 10 KG).
*
The total weight of an article is about
*
1,040+-10 KG.
* Each
article is covered with a plastic
*
cover and is
tied up with a packing tape.
*
At the bottom are supported by two
*
pieces of zinc
alloy ingots in favor of
*
transportation
.
|
|
|
. |
| |
 |
| |
Packaging
Specifications of Magnesium Alloy
* 82 alloy
ingots per article
*
(an alloy ingot weighs about 6 KG).
*
The total weight of an article is about 492
KG.
* Each article
is covered with a plastic cover
*
and is tied up
with a packing tape.
*
At the bottom are supported by two pieces
*
of magnesium
alloy ingots in favor of
*
transportation.
.
|
|
|
Recycle Standards of Magnesium Alloy
Based on the considerations
of environmental protection and of serving companies,
we undertake recycling specific for the magnesium alloy waste
material (first valuable
waste) produced during manufacturing processes by die-casting
manufacturers. The
requirements of recyclable waste are summarized as follows:
1. Stabilization of Waste Material
Composition :
According to composition, die-casting magnesium alloys can be
mainly divided into
AZ91D, AM60B, AM50A, etc. Each die-casting factory selects suitable
alloy material
for processing, depending on its needs of product properties.
To ensure waste material qualities in convenience of undertaking
our recycling/re-
processing work, each die-casting factory must categorize and
recycle for usable
waste material ingredients, that is, the alloy waste material
used in the factory,
including AZ91D, AM60B and AM50A, must be placed in their categories
respectively.
2.
Types and Categorization of Waste Material Recycling :
| Categorization
of Magnesium Waste Material |
| Recyclable
parts |
Thick meat
material |
#
biscuit
# pouring system: pouring
channels,
# flowing channels,
rising heads
# poor thick meat
casts |
| Sheet material |
#
poor sheet casts |
| Unrecyclable parts |
#
casts mixed with other metal compounds
# casts through surface
processing
# (such as coating and
electroplating)
# waste injected from die-casting
machines during
# die-casting process
# fragments produced from
flow off and vent holes
# cutting material with
oil or water lubricants
# furnace dregs or sediments |
|
| |
Fl. 4-2, 888 Jing Guo Rd., Taoyuan
City, Taoyuan Hsien, Taiwan, R.O.C
TEL : 03-3178088 FAX : 03-3178158 E-Mail :
ktl@bizmail.com.tw |
